How do you learn to drive on Mars?
Published : Monday, 13 May, 2019 at 1:44 PM Count : 702
Time is of the essence. It's now little more than a year until the Rosalind Franklin rover is sent to Mars.
Engineers across Europe and Russia are busy assembling this scientific vehicle, and the hardware that will both carry it to the Red Planet and put it down safely on the surface, BBC reports.
In parallel to all this are the ongoing rehearsals.
These are needed to ensure controllers can easily and efficiently operate the robot from back here on Earth.
The videos on this page show the latest locomotion verification tests that have been conducted at the RUAG company in Switzerland.
How will the rover stand up on its landing platform and roll down the ramps that take it on to the dusty, rocky terrain of Mars?
How will it negotiate any boulders at the targeted equatorial touchdown location of Oxia Planum?
And how will Rosalind Franklin cope with steep slopes?
These questions have to be answered now, before the rover’s rocket blasts off from the Baikonur Cosmodrome in July/August next year.
The robot is a joint project of the European and Russian space agencies. It will roam an ancient terrain, looking for evidence of past – perhaps even present – life.
Key to this search will be a drill that will pull up rocky samples from up to 2m below the surface. It's underground – away from radiation - that we think life might have a chance on Mars.
Those samples will be delivered to a sophisticated suite of instruments that live inside a sterile box known as the Analytical Laboratory Drawer.
The ALD has just gone through its own test programme in Turin, Italy, and is now sitting in a cleanroom at Airbus in Stevenage, UK, waiting to be bolted on to Rosalind Franklin. Integration of the ALD will likely take place next week.
Engineers at Stevenage have a deadline of July/August to assemble all the robot's components and get the finished vehicle out the door.
Significant outstanding items sill to be attached include the bogey system (the locomotion chassis and wheels) and the British camera system (PanCam) that will survey Oxia Planum. This equipment will sit atop a mast.
From southern England, the completed rover will travel to southwest France, to Toulouse, where it will be "shaked and baked" at another of Airbus's facilities. This “environmental testing” will demonstrate the robot can handle the vibrational and temperature extremes it will experience on the flight to Mars.
From Toulouse, Rosalind Franklin will travel across France to Cannes. It's on the Côte d'Azur that the Franco-Italian aerospace company Thales Alenia Space will do the all-important final fit-check, bringing together the rover, its Russian "Kazachok" landing system (built by NPO Lavochkin), and its German cruise vehicle (from OHB-System) which will manage the journey from Earth to Mars.
Assuming all that goes off without a hitch, everything heads to Baikonur and launch preparations.
Fourteen months really is no time at all.